SDLG vs Kubota: compact track loaders for Ontario jobs
Comparing SDLG and Kubota compact track loaders? Start with the TV1100H and SVL75-3 specifications below, then check access width, attachment requirements and local service arrangements for your job. Both manufacturers publish a rated operating capacity at 35% of tipping load. This comparison covers these tracked models; stand-on loaders and wheeled skid steers need a separate shortlist. Choose against the configuration and work you actually need.
Official specifications checked:
TV1100H vs SVL75-3: official specifications
| Specification | SDLG TV1100H | Kubota SVL75-3 |
|---|---|---|
| Rated operating capacity — 35% of tipping load | 1,180 kg | 1,129 kg |
| Operating weight | 4,600 kg | 4,273 kg — closed cab |
| Engine power — manufacturer’s stated basis | 53.7 kW (72 hp) — rated | 53.4 kW (71.6 hp) gross — brochure; 55.4 kW (74.3 HP) gross — Kubota Canada product page |
| Standard hydraulic flow | 75 L/min | 72.7 L/min — auxiliary |
| High hydraulic flow | 113 L/min | 112.8 L/min — auxiliary, high-flow option |
| Machine width without bucket | 1,785 mm | 1,755 mm |
Capacity uses the same tipping-load percentage, but these figures do not replace attachment-specific load limits. For weight, the Kubota brochure includes an operator and separates open and closed cabs; the SDLG page does not detail the weight configuration. Confirm the actual working configuration before planning transport.
The power labels differ: SDLG states rated power without a test standard on the product page. For Kubota, the linked brochure gives 53.4 kW (71.6 hp) gross, while Kubota Canada’s product page gives 55.4 kW (74.3 HP) gross. Both official values are shown in the table; confirm the applicable specification for the machine being considered.
The Kubota brochure lists high-flow hydraulics as an option; SDLG describes high flow as standard on the TV1100H. Check couplers, pressure, electrical controls and any drain-line requirements with the attachment supplier. Flow alone does not establish compatibility.
Manufacturer sources
- SDLG North America: TV1100H specifications
https://www.sdlgna.com/product/850
- Kubota Canada: linked SVL75-3 brochure (specifications and dimensions)
https://cdn.bfldr.com/JXWPO0W5/as/kkh4q3xkkhwz9sxjwwbfbrrs/SVL75-3_Brochure_NEW_-_EN
- Kubota Canada: SVL75-3 product page (power discrepancy noted above)
https://www.kubota.ca/products/SVL753
- SDLG North America: product categories
https://www.sdlgna.com/product?category=1
How to choose for your job
Site and access
Measure gates, work lanes, turning space and the intended attachment. The machine-width row excludes the bucket; an attachment can determine the clearance you need. Describe the ground conditions, slopes and surface protection requirements, then check the operator’s manual for the proposed configuration.
Attachments and hydraulic configuration
Give each supplier the exact attachment model and its required flow, pressure and connections. Ask which hydraulic configuration is included in the proposed machine. Keep bucket work and fork handling separate when checking capacity; do not treat a tipping-load percentage as a rating for every attachment.
Service near your work area
For SDLG, discuss your work location and service needs with TerraX Equipment in Ontario. For Kubota, use Kubota Canada’s dealer locator and confirm construction-equipment support directly with that dealer. Ask both about maintenance access, parts ordering and travel arrangements.
Find a Kubota Canada dealerFrequently asked questions
- Does SDLG list compact track loaders in North America?
- Yes. SDLG North America lists Compact Track Loader, Stand-On Track Loader and Skid-Steer Loader as separate product categories. Its TV1100H page identifies that model as a compact track loader; that is the SDLG model compared here.
- Is this a comparison of every SDLG and Kubota loader?
- No. It compares the SDLG TV1100H and Kubota SVL75-3 compact track loaders. It does not rank the brands’ wheel loaders, stand-on loaders or wheeled skid steers. Check the exact model, attachment and configuration for your work.
- Where should Ontario buyers check service arrangements?
- Discuss SDLG service with TerraX Equipment and check Kubota support through Kubota Canada’s dealer locator. Confirm support for your machine and work location with the relevant provider.
